65 lines
2.6 KiB
C
65 lines
2.6 KiB
C
#pragma once
|
|
|
|
#include "gpio.h"
|
|
#include "qp_internal.h"
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter SH1107 configurables (add to your keyboard's config.h)
|
|
|
|
#if defined(QUANTUM_PAINTER_SH1107_SPI_ENABLE) && !defined(SH1107_NUM_SPI_DEVICES)
|
|
/**
|
|
* @def This controls the maximum number of SPI SH1107 devices that Quantum Painter can communicate with at any one time.
|
|
* Increasing this number allows for multiple displays to be used.
|
|
*/
|
|
# define SH1107_NUM_SPI_DEVICES 1
|
|
#else
|
|
# define SH1107_NUM_SPI_DEVICES 0
|
|
#endif
|
|
|
|
#if defined(QUANTUM_PAINTER_SH1107_I2C_ENABLE) && !defined(SH1107_NUM_I2C_DEVICES)
|
|
/**
|
|
* @def This controls the maximum number of I2C SH1107 devices that Quantum Painter can communicate with at any one time.
|
|
* Increasing this number allows for multiple displays to be used.
|
|
*/
|
|
# define SH1107_NUM_I2C_DEVICES 1
|
|
#else
|
|
# define SH1107_NUM_I2C_DEVICES 0
|
|
#endif
|
|
|
|
#define SH1107_NUM_DEVICES ((SH1107_NUM_SPI_DEVICES) + (SH1107_NUM_I2C_DEVICES))
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Quantum Painter SH1107 device factories
|
|
|
|
#ifdef QUANTUM_PAINTER_SH1107_SPI_ENABLE
|
|
|
|
/**
|
|
* Factory method for an SH1107 SPI LCD device.
|
|
*
|
|
* @param panel_width[in] the width of the display in pixels (usually 64)
|
|
* @param panel_height[in] the height of the display in pixels (usually 128)
|
|
* @param chip_select_pin[in] the GPIO pin used for SPI chip select
|
|
* @param dc_pin[in] the GPIO pin used for D/C control
|
|
* @param reset_pin[in] the GPIO pin used for RST
|
|
* @param spi_divisor[in] the SPI divisor to use when communicating with the display
|
|
* @param spi_mode[in] the SPI mode to use when communicating with the display
|
|
* @return the device handle used with all drawing routines in Quantum Painter
|
|
*/
|
|
painter_device_t qp_sh1107_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode);
|
|
|
|
#endif // QUANTUM_PAINTER_SH1107_SPI_ENABLE
|
|
|
|
#ifdef QUANTUM_PAINTER_SH1107_I2C_ENABLE
|
|
|
|
/**
|
|
* Factory method for an SH1107 I2C LCD device.
|
|
*
|
|
* @param panel_width[in] the width of the display in pixels (usually 64)
|
|
* @param panel_height[in] the height of the display in pixels (usually 128)
|
|
* @param i2c_address[in] the I2C address to use
|
|
* @return the device handle used with all drawing routines in Quantum Painter
|
|
*/
|
|
painter_device_t qp_sh1107_make_i2c_device(uint16_t panel_width, uint16_t panel_height, uint8_t i2c_address);
|
|
|
|
#endif // QUANTUM_PAINTER_SH1107_I2C_ENABLE
|